Nessun prodotto
Follow us on facebook
EFL7950
Nuovo prodotto
Bellissima ventola
da 80 mm
Questo prodotto non è più disponibile
Aileron: | Controlled by two 13g metal gear servos |
Airfoil Shape: | Semi-Symmetrical |
Approx. Flying Speed: | 80 mph |
Approximate Assembly Time: | Less than 1 Hour |
CG (Center of Gravity): | 6.7" (170mm) back from leading edge of wing measured at the fuselage |
Charger: | Not included |
Completion Level: | Bind-N-Fly Basic |
Control Throw (Flaps): | Take-Off 0.98" (25mm), Landing 1.8" (45mm) |
Control Throw - High (Ailerons): | 0.79" (20mm) |
Control Throw - High (Elevator): | Up 1.2" (30mm), Down 0.79" (20mm) |
Control Throw - High (Rudder): | 0.59" (15mm) |
Control Throw - Low (Ailerons): | 0.59" (15mm) |
Control Throw - Low (Elevator): | Up 0.98" (25mm), Down 0.47" (12mm) |
Control Throw - Low (Rudder): | 0.39" (10mm) |
EDF Size: | 3.1" (80mm) diameter |
Elevator: | 13g metal gear servo control |
Expo (Ailerons): | Low Rate 5%, High Rate 10% |
Expo (Elevator): | Low Rate 5%, High Rate 15% |
Expo (Rudder): | Low Rate 5%, High Rate 10% |
Flaps: | 13g metal gear servos control |
Flying Weight: | 6.32 - 6.62lbs (2866 - 3006g) |
Length: | 53.7" (1364mm) |
Material: | EPO foam |
Minimum Required Radio: | 6-channel |
Minimum Speed Control: | 100A included |
Motor Size: | 3270-2000Kv |
Recommended Motor Battery: | 6S 4000-5000mAh LiPo w/ EC5 connector |
Retracts: | Yes, nose and main gear |
Rudder: | 13g metal gear servo control |
Servos: | 7 |
Transmitter Range: | Full |
Wing Area: | 443.3 sq in (28.6 sq dm) |
Wing Loading: | 33 - 43oz sq/in (100 - 105g sq/dm) |
Wing Tube Length: | 17.7" (450mm) |
Wing Tube OD: | 0.50" (12.8mm) |
Wingspan: | 35.8" (910mm) |